Bespoke Furniture Cost in Delhi NCR: Prices by Piece, and How It Is Made

Bespoke furniture in Delhi NCR costs, at typical 2026 market rates, anywhere from about ₹25,000 for a simple made-to-measure console to ₹4 lakh or more for a solid-wood sideboard or a leather sofa. The piece sets the starting point; the material decides where in the range it lands. A king bed in laminate and a king bed in walnut veneer with an upholstered headboard are both “custom beds”, and they are priced three to four times apart.

This guide gives the ranges piece by piece at three material levels, explains what moves the price, and walks through how a custom piece goes from a drawing to your room. If you are still deciding whether to have furniture made at all, our comparison of custom millwork and ready-made furniture covers where bespoke is worth it and where it isn’t.

All figures are typical Delhi NCR market rates for supply and installation, before GST. They are a planning guide, not a quotation and not our rate card. A firm price needs a drawing and an agreed list of materials.

The three material levels

Every range below uses the same three levels, so you can read across a whole room at one level:

Bespoke furniture prices, piece by piece

Fitted pieces are priced by area rather than by piece. Wardrobes, bookshelves and display units run about ₹1,200 – ₹1,800 per sq ft of front area in laminate, ₹1,800 – ₹2,800 in acrylic or veneer and ₹2,800 – ₹4,500 in PU lacquer, glass or fluted shutters. Those are the same rates as our interior design cost per sq ft guide. A custom TV unit typically lands between ₹15,000 and ₹70,000+ (see our TV unit cost guide), and a full walk-in wardrobe is a project of its own.

A few notes on reading the table:

• Sofas are easier to compare per seat: roughly ₹15,000 – ₹25,000 a seat at the essential level, ₹25,000 – ₹50,000 at premium and ₹50,000 – ₹1.2 lakh+ at luxury. An L-shaped or sectional sofa is priced by its seats, plus the corner.
• Dining tables move most with the top. A veneer top sits at the low end of each band; solid hardwood in the middle; Italian marble or a large sintered slab at the top. Extending mechanisms add ₹15,000 – ₹40,000.
• Beds move with the headboard. A plain laminate headboard and a full-height upholstered or panelled one can double the price of the same bed.

What moves the price

The table gives a range for each piece because the same drawing can be made in very different materials. These are the decisions that move a piece through its range, roughly in order of impact.

Solid wood or board

Solid hardwood costs more than board with a veneer face, and it is not always the better choice. Delhi swings from dry winters to a humid monsoon, and a wide solid plank moves with it. For legs, frames, chair parts and table edges, solid wood is right. For headboards, sideboard tops and long shelves, veneer on BWP plywood or HDHMR stays flatter. Our HDHMR vs BWP plywood guide explains the two boards.

Among solid woods, sheesham is the most affordable hardwood in common use, teak costs more and handles moisture well, and imported oak and walnut cost the most.

The finish

• Laminate: the least expensive and the most hard-wearing for everyday surfaces.
• Veneer with a PU or melamine polish: real wood grain at a moderate cost.
• PU lacquer (painted): a smooth matte, satin or gloss colour finish; it needs several coats in a dust-free booth to look right.
• Hand-rubbed oil or wax: the most natural look on solid wood, and it needs touching up over the years.

A good lacquer finish is labour and booth time more than material, which is why it sits at the top of the range.

Upholstery

For a sofa or an upholstered bed, the price depends on three things:

• Fabric: about ₹600 per metre for basic Indian fabric to ₹6,000+ for imported velvet, bouclé or performance fabric. A 3-seater takes 10 to 14 metres.
• Fill: standard foam, high-resilience foam, pocket springs or a feather wrap, in rising order of cost and comfort.
• The frame: a kiln-dried hardwood frame lasts decades; a soft-wood or board frame is cheaper and the first thing to fail.

Leather usually adds 40 to 80 per cent over a good fabric.

Stone, metal and hardware

A marble or sintered top can cost more than the base beneath it. Metal details such as brass inlays, PVD-coated legs and trims each add a line. Hardware (soft-close hinges, push-to-open fittings, hydraulic bed lifts, branded drawer channels) is a small item per piece but adds up across a house.

Size and complexity

Price rises faster than size: a 10-seater table needs a thicker top, a stiffer frame and often a stone slab that has to be specially sourced. Curves, fluting, carving, mitred edges and hidden mechanisms all add hours.

How a bespoke piece is made

The price of a custom piece is mostly the hours behind it. This is the usual sequence for a piece we make, and roughly what to expect from any good workshop.

1. Brief and measurement. The room is measured, along with anything the piece has to clear: skirting, switch boards, AC pipes, the swing of a door.
2. A dimensioned drawing. Plan, elevation and section, with the materials named. This is what you approve, so check heights and depths here: seat height, table height, bed height with the mattress.
3. Finish sample. For veneer, stain or lacquer, a sample is made on the actual material and checked in your room’s light. Colours on a screen and on a small catalogue chip are not reliable.
4. Cutting and machining. Panels are cut on a panel saw or CNC nesting machine, which is what keeps joints tight and parts square. Edges are profiled and edge-banded.
5. Assembly and dry fit. The piece is assembled in the workshop and checked against the drawing before any finish goes on.
6. Finishing. Lacquer and polish go on in an enclosed paint booth, coat by coat with drying time in between. Rushing this step is where most cheap custom furniture shows its price.
7. Delivery and installation. Large pieces travel in parts and are assembled on site; fitted pieces are scribed to the wall.

Timelines: about 3 to 5 weeks for board furniture (beds with storage, consoles, desks, shelving), and 6 to 10 weeks for solid wood, stone-topped and upholstered pieces, counted from the day the drawing and finish sample are approved. Imported stone or fabric can add time, so order those first.

Bespoke or showroom: how the prices compare

• Against flat-pack and mass-market brands, bespoke costs more. That furniture is made in thousands to standard sizes.
• Against mid-range showroom brands, a made-to-measure piece in a comparable material often costs about the same, because there is no showroom margin, and it is made to your size.
• Against imported designer brands, bespoke usually costs less for the same materials, though not the same name.

Bespoke pays off most where a standard size does not fit: a sofa for a long wall or an L-shaped room, a dining table for a narrow room, a bed with storage designed around what you actually store, or a sideboard that has to line up with panelling. Loose accent chairs, lamps and rugs are usually better bought.

What to check in a bespoke furniture quotation

Two quotes for “a 6-seater dining table” can describe very different tables. Before comparing, make sure each one names:

• a dimensioned drawing, or at least overall sizes;
• the core material: the wood species, or the board and its grade;
• the finish, with a sample before production;
• the hardware brand, for anything that opens, slides or lifts;
• for upholstery: the fabric (with a swatch), the foam or fill, and the frame material;
• the stone, if there is a top: type, thickness and edge profile;
• delivery, installation and the delivery time;
• GST, commonly 18 per cent on furniture.

A quote that names only the piece and a price leaves every one of those decisions to the maker.

Getting a price for your own pieces

We design and make custom furniture for homes in Delhi, Gurugram and Noida in our own manufacturing unit in Gurugram, with panel cutting, CNC, edge banding and a paint booth under one roof. For a room or a whole house, the same workshop builds the modular furniture too, so finishes match across the fitted and loose pieces.

Send us a photo of the room, rough sizes and a reference image of what you like, or book a site visit, and we will come back with a drawing and a quote against the materials you choose.