Panel Saw & Beam Saw
Every wardrobe and kitchen starts as a full-size board. Our panel saw and beam saw break those boards down into square, accurately sized panels, so every part that moves forward into the line is right before anything else is done to it.
Capabilities
- Panel saw and beam saw for breaking down full-size boards
- Pressure-beam clamping for clean, chip-free straight cuts
- Accurate, repeatable panel dimensions
- Square parts ready for routing, edging, and assembly
What It Means For You
- Perfectly square panels from the very first cut
- Consistent sizes across a full run of parts
- A clean, accurate base for every later stage
The cut that everything else depends on
Before a board can become a cabinet side or a wardrobe shutter, it has to be broken down to size — and it has to be broken down accurately. If that first cut is even slightly off square, the error follows the panel through every later stage: the edge band sits wrong, the joints gap, and the doors never quite line up.
Our panel saw and beam saw handle this first step. A pressure beam clamps the board flat while the saw makes a clean, straight, chip-free cut, so each panel comes off the machine square and sized to spec.
Accuracy you can repeat
Modular furniture is built from many identical parts. A run of cabinet sides has to be the same size, or assembly slows down and the finish suffers. Breaking boards down on a beam saw — rather than by hand — means the same dimension repeats to the same tolerance across the whole batch.
Where it sits in the process
The panel saw is the start of the line. From here, parts move to our CNC cutting and nesting for shaped cuts and drilling, then on to routing and profiling, edge banding, and finishing. Getting this first cut right is what makes every step that follows predictable.
Consultation
Want furniture made in our own unit?
Tell us about your project and we'll walk you through how we plan, manufacture, and finish it in-house.
Manufacturing FAQs
Common questions about our in-house modular furniture manufacturing unit.
Do you manufacture furniture in-house or outsource it?
We manufacture in-house. Cutting, pressing, edge banding, boring, and painting all happen in our own facility, which lets us control quality and timelines rather than depending on third-party workshops.
Which machines do you use?
Our unit runs a panel saw and beam saw with CNC nesting, router and profiling equipment, a cold press for lamination, automatic edge banding, multi-boring for hardware, and an enclosed spray paint booth with drying, supported by dust extraction and compressed-air systems.
Does in-house manufacturing improve the finish?
Yes. Machine cutting and boring give square panels and precise joints, automatic edge banding produces seamless edges that resist peeling, and our own paint booth delivers a consistent, durable finish with no transit damage.
Can you handle both standard and custom pieces?
Yes. Our machinery handles repeatable modular components efficiently, while the same setup lets us produce custom sizes and finishes when a project needs bespoke elements.
Where do you deliver from the unit?
Our unit is in Delhi NCR and we manufacture and deliver for projects across Delhi, Gurugram, and Noida, as well as for out-of-state projects elsewhere in India.